If you’d like to install Windows but don’t have a DVD drive, it’s easy enough to create a bootable USB flash drive with the right installation media. Here’s how to get it done for Windows 10, 8, or 7.
Before you install Windows 10, it’s a good idea to save any work and back up your PC before you start. If you used the media creation tool to download an ISO file for Windows 10, you’ll need to burn it to a DVD before following these steps. Attach the USB flash drive or insert the DVD on the PC where you want to install Windows 10. Is there a way to install windows 10 to onto a USB flash drive? I basically want to use a 128 GB USB stick to run Windows 10, so that I can just plug it in to a pc and boot into a preinstalled version of Windows 10. With the help of this amazing Windows update alternative tool, you can easily create bootable DVD or USB of Windows 10. In case, you don’t want to use DVD or USB drive to clean install Windows 10. It’s also possible. Clean installing Windows 10 using ISO file is not much different from clean installing Windows 10 from DVD or USB. Windows 10 install.iso or DVD; USB flash drive with at least 5GB free space. This drive will be formatted, so make sure it doesn't have any important files on it. Technician PC - Windows PC that you'll use to format the USB flash drive; Destination PC - A PC that you'll install Windows on.
Download Windows 10 ISO (any language, any version) and make a full and clean Installation in your device (PC, Laptop, etc) from USB Flash Drive. This tutorial will help you to download and make a. Mar 09, 2017 If you’d like to install Windows but don’t have a DVD drive, it’s easy enough to create a bootable USB flash drive with the right installation media. Here’s how to get it done for Windows 10, 8, or 7. In this guide, we’ll be making a simple USB drive that acts just like an installation DVD, and lets you install one version of Windows.
In this guide, we’ll be making a simple USB drive that acts just like an installation DVD, and lets you install one version of Windows. If you’d like to create a USB drive from which you can install multiple versions of Windows, you’ll want to follow these instructions instead.
Step One: Create or Download an ISO for the Windows Installation Media
Before you can create your USB installation drive, you’ll need to have your Windows installation media available as an ISO file. If you already have an installation DVD, you can use it to create an ISO file using ImgBurn, a handy little free utility that’s been around forever. If you don’t have Windows installation DVD, you can download ISO files for Windows 10, 8, or 7 directly from Microsoft.
You’ll also need a minimum of a 4GB flash drive to create your installer. Be sure to copy anything you want off of it, because this process will erase it. Once you have both your ISO and flash drive in hand, you’re ready to continue.
Step Two: Create Your Installation USB Drive with the Windows USB/DVD Download Tool
With your ISO file saved to your computer, your next step is to download and install the Windows USB/DVD Download Tool. The description on that page, on the actual download page, and on the tool itself talk a lot about Windows 7 and even XP. Don’t let that worry you. The tool works just fine for Windows 7, 8, and even 10.
Once you’ve got the tool installed, creating your USB installation drive is a pretty straightforward process. Run the tool and give it permission to make changes to your PC. Click “Browse” to locate your Windows ISO file and then click “Next.”
On the next page, click “USB device.” The tool can also burn the ISO to a DVD if you need that option.
Use the drop-down menu to choose the USB flash drive you want to use. If you haven’t inserted it yet, do that now, and then click the Refresh button. Once you’ve got the right drive selected, click “Begin copying.”
If your USB drive has anything already on it, you’ll next see a warning that it will be formatted and you’ll lose any data stored on the drive. Go ahead and click “Erase USB Device.” If you started with a newly-formatted USB drive, you won’t see this warning.
Bootable Usb Flash Drive To Install Windows 10
Now you just have to wait for the process to complete, which usually takes 15-20 minutes. The drive will be formatted and files copied to the flash drive.
When the process is finished, you can close the download tool.
If you take a look at the flash drive in File Explorer, you’ll be able to see the same files that you would if you opened the installation DVD.
And now that you have your installation USB drive, you can use it to start the computer on which you want to install Windows. You may have to fiddle with the BIOS on the computer to allow it to boot from USB or to change the boot order so that it will boot from the USB first. You may even be able to use the disk on computers that don’t support booting from USB, but you’ll need to take additional steps to create a bootable CD.
READ NEXT- › How to Disable or Enable Tap to Click on a PC’s Touchpad
- › How HTTP/3 and QUIC Will Speed Up Your Web Browsing
- › Motherboards Explained: What is ATX, MicroATX, and Mini-ITX?
- › How to Use the chroot Command on Linux
- › How to Make iPhone Apps Always Ask for Location Access
This is a complete guide to install Windows 10 from a bootable USB. One of the main advantages of installing a version of Windows operating system from a bootable USB is speed, especially when compared to the traditional way of installing Windows from a DVD.
Even though there are ample amount of free utilities out there to help you create a bootable USB of Windows 10 with a few mouse clicks, it’s possible to prepare the bootable USB without using third-party utilities. All you need to do is execute a bunch of commands in the Command Prompt to make your Windows 10 bootable USB.
The other advantage of the Command Prompt is that it’s error free, meaning you will be able to create the bootable USB without encountering any errors when commands are entered properly.
The method we use for creating a bootable Windows 10 is USB is the same as the method we use for previous versions of Windows operating system. In other words, the procedure is pretty much the same and should not take more than 10 minutes when done correctly.
Here is how you can make bootable USB of Windows 10 from the Command Prompt using the Diskpart command.
Things you will need:
# Windows 10 ISO or Windows 10 DVD
# A USB with 4GB+ size
# A working Windows 7/8/8.1 PC to create the bootable USB
Important: Before you proceed to prepare your Windows 10 bootable media, please check the version of Windows 7/8/8.1 on which you are going to make the bootable USB of Windows. This is because, you can’t prepare the bootable USB of 64-bit of Windows 10 on a PC running Windows 7, Windows 8, or Windows 8.1. In simple words, you can’t use 32-bit installation of Windows to prepare the bootable USB of 64-bit Windows.
So, please read the following line carefully:
# It’s not possible to create 64-bit version of Windows 10 bootable USB on a PC running 32-bit version of Windows.
# You need x64 version of Windows 7/8/8.1 to prepare bootable USB of Windows 10 x64.
# You can create x86 version of Windows 10 bootable USB on computer running x86 version of Windows 7/8/8.1
Install Windows 10 from USB drive
Step 1: Connect your USB drive to Windows 7 or Windows 8 PC and move all important data to a safe location as the drive will be erased during the process. We also suggest you un-plug any other external hard drive connected to avoid selecting a wrong drive during the drive selection.
Step 2: Open elevated Command Prompt. To do so, you can type CMD in Start menu or Start screen and then simultaneously press Ctrl + Shift + Enter keys. Windows 7 users can also navigate to Start menu, All Programs, Accessories, right-click on Command Prompt and then click Run as administrator option. Click Yes button when you see the UAC prompt to continue.
Note that it’s very important to open Command Prompt as administrator to avoid errors. Be sure to open the elevated prompt. Most users ignore this step and end up errors while preparing the bootable USB. When you’re launching Command Prompt, you’ll see the UAC prompt where you need to click the Yes button.
Step 3: In the elevated Command Prompt, type DISKPART and then hit enter key.
Now, type LIST DISK command and press the Enter key again to see all connected disks. This is the important step is you should note the disk number assigned for your internal hard disk and your connected USB drive.
If you have only one internal HDD or SSD, 1 will be the disk number of your USB drive. As you can see in the above picture, the disk number for my USB drive is 1.
Step 4: Type all the following commands one after another and press enter key after each command.
SELECT DISK 1
(IMP: In the above command, replace”1” with the disk number of your USB drive obtained in the previous step. Entering a wrong disk number will cause data loss. So please double check the disk number before entering the disk number.)
(press enter key)
CLEAN
(press enter key)
CREATE PARTITION PRIMARY
(press enter key)
Install Windows 10 Onto Usb Drive
SELECT PARTITION 1
(press enter key)
ACTIVE
(press enter key)
FORMAT FS=NTFS QUICK
IMP: If your PC supports UEFI, please format the drive with FORMAT FS=FAT32 Quick command.
(press enter key)
ASSIGN
(press enter key)
EXIT
(press enter key)
Since we aren’t finished yet, please don’t close the Command Prompt. Simply minimize it to the taskbar and then follow the instructions in the next step.
Step 5: If you’re on Windows 8/8.1 and have the ISO image of Windows 10, right-click on the ISO image and then click Mount option to mount the ISO file. After mounting, open This PC (Computer) and note the drive letter of it.
And if you’re on Windows 7, use an image mounting software such as Virtual CloneDrive and note the drive letter after mounting the ISO. If you’re not sure how to go with it, please follow our how to mount an ISO file in Windows 7 guide for step-by-step instructions to mount your Windows 10 ISO and get the drive letter.
In this guide, we’re assuming “J” as the drive letter of the virtual drive where you have mounted Windows 10 ISO.
And if you have the DVD of Windows 10, simply insert the DVD into the optical drive and note the drive letter of your optical drive. You can then use this drive letter whenever needed.
Step 6: Maximize the Command Prompt that you had minimized in Step 4 and execute the following commands one after another.
J: CD BOOT
(Hit enter key)
Here “J” is the drive letter of your virtual drive containing Windows 10 ISO or DVD drive containing installation files.
CD BOOT and press enter.
Step 7: Finally, type the following command:
BOOTSECT.EXE /NT60 K:
In the above command, replace “K” with the drive letter of your USB drive that you’re making bootable.
Once you see “Bootcode was successfully updated on all targeted volumes” message, simply close the Command Prompt. We are almost done!
Step 8: Finally, copy all the contents of your Windows 10 ISO image to the root of the USB drive. You can either extract ISO file contents or copy files from the mounted drive. The same procedure applies even if you have the DVD of Windows 10. You just need to copy all files to the root of the USB drive.
Step 9: Now that you have your bootable USB of Windows 10, turn on the PC on which you want to install Windows 10, enable booting from USB, set the boot priority to boot from USB, and then restart your PC again to begin installing Windows 10. Follow the very simple on-screen instructions to complete the installation.
Install Windows 10 Free
If you come across any issues while preparing the bootable USB or installing Windows 10, do let us know by leaving a comment. Before leaving your comment, please double check that you have used an elevated prompt to prepare your bootable USB.
Usb Drive Install Windows 10 Dengan Flashdisk
Enjoy the newest version of Windows operating system!